CRANE WHITE 500KG ROPE BACKSAVER MARK II

CRANE WHITE 500KG ROPE BACKSAVER MARK II

Price N/A (ex GST)

Product Code: F19001CWR

Sales Quantity: EACH


Brand: JARRETT

F19001CWR - Backsaver Crane Mark II with Extendable Boom (500kg) - Dacrotised and powder coated white, comes with F18265 (500kg) 10:1 Brake Winch with Fibre Rope

 
Save Your Back …. Save Your Money

The Backsaver Crane provides the perfect lifting solution to tradesmen, farmers, delivery drivers and anyone who has to lift loads of anything from fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-mowers, cement mixers, farm machinery, livestock, fence, brick cutters and even tractor tyres -  the possibilities are endless. In fact if you have ever thought, “There’s got to be a better way”, chances are that Jarrett has already found it.
 
The simple design of the Backsaver Crane means it is easy to assemble and can be fitted almost anywhere – to jetties, utes or tray tops and to a wide variety of fixed platforms. When a Backsaver Crane is vehicle mounted and the time comes to change vehicles, it is simple to remove and leaves only four holes.  The Backsaver Crane is then ready to install elsewhere. The Backsaver Crane’s simple operation means that little can go wrong and spare parts are available through Jarrett distributors around Australia.
 
The Backsaver Crane provides the perfect lifting solution to tradesmen, farmers, delivery drivers and anyone who has to lift loads of anything from fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-mowers, cement mixers, farm machinery, livestock, fence, brick cutters and even tractor tyres – the possibilities are endless.
 
In fact if you have ever thought, “There’s got to be a better way”, chances are that Jarrett has already found it.  
Backsaver Crane:
Max extended height = 1950 vertical 1450 horizontal at 350kg S.W.L
Min extended height = 1530 vertical 1700 horizontal at 280kg S.W.L
Max retracted height = 1640 vertical 1060 horizontal at 500kg S.W.L
Min retracted height = 1330 vertical 1270 horizontal at 400kg S.W.L
Vertical storage height = 2300

8000 Series Brake Winch as supplied:
Model : F18265
Gear Ratio: 10:1
Application: Lifting
Rated Capacity: 500kg (4900N)
Mass (Winch only): 6kg
Type of Brake: Self Actuating
Drum Diameter: 50mm
Flange Diameter: 130mm
Drum Width: 52mm
Fibre Rope size: Ø6mm
Maximum Fibre Rope Capacity: 12m x Ø6mm
Max. Effort on handle at Rated Load: 18kg
Fibre Rope Breaking Strain: 2050kg
Fibre Rope as supplied: 7.5m x Ø6mm
Fastening Device: Snap Hook
 
Recommended for lifting applications.
Webbing cannot be used on these winches
Self actuating brake requires a minimum of 18kg to operate safely.
Jarrett Winches and Cranes are not designed for the movement of people.

Related Products

CRANE BACKSAVER 500KG WITH ROPE

CRANE BACKSAVER 500KG WITH ROPE

Price N/A
10:1 BRAKE WINCH WITH CABLE

10:1 BRAKE WINCH WITH CABLE

Price N/A
SPARE KIT - 653D BOOM ASSY 500KG

SPARE KIT - 653D BOOM ASSY 500KG

Price N/A
SPARE PARTS KIT - 643 F

SPARE PARTS KIT - 643 F

Price N/A
SPARE KIT - WORM DRIVE GEAR

SPARE KIT - WORM DRIVE GEAR

Price N/A
SPARE KIT - WORM GEAR

SPARE KIT - WORM GEAR

Price N/A
ACCESSORY KIT - 500KG BASE

ACCESSORY KIT - 500KG BASE

Price N/A
SPARE KIT - HANDLE ASSY

SPARE KIT - HANDLE ASSY

Price N/A